Oliver Parts: Oliver Bread Slicer Replacement Parts and Blades

Home
Oliver Parts

Quick view

SKU: BAGEL KNIFE

Knife Serrated Bagel and Bun machine Compatible replacement blade for 7107-7053

MSRP:

Was:

Price Now

$260.00

Add to Your List

Oliver Bread Slicer Parts and Oliver Bread Slicer Blades

NBS is a one-stop shop for restaurant equipment parts & service. You can find our quality replacement parts to fit Oliver products, including Oliver bread slicer replacement parts, in our catalogs. From our inception, we have believed in providing the very best service to our customers, and it is that philosophy that enables us to provide low cost deals on replacement Oliver slicer parts and blades. We offer the best in replacement parts, especially replacements for Oliver restaurant equipment parts, knowing that our customers expect precision in their cooking endeavors.

How to Change Blades on Oliver Bread Slicer

1. Remove the front blade frame from the machine - Removal of the front blade frame is necessary to access the blades for replacement. Both blade frames may be removed for cleaning or maintenance but the back one can stay when replacing the Oliver slicer blades.
a. Open the top assembly and make sure the strut is safely in position.
b. Remove the side panels.
c. Remove the outfeed table.
d. Remove the hair pin clips from the eccentric pins and slide the connecting links
off on both sides of the front blade frame.
e. Release and remove the cam levers on the base of the front blade frame, and
unscrew the t-bolts.
f. Lift the front blade frame out of the slicer.
Note: DO NOT LOOSEN THE NUTS WHICH SECURE THE ECCENTRIC PINS
UNLESS BLADE FRAME POSITIONS NEED ADJUSTMENT.

2. Decrease the pressure on a blade by lifting up on the upper blade pin.
Special knife tools are available to make the task easier.
3. While the tension is reduced on the blade, carefully remove it.
Reminder-- The rear blade frame blades can be left in the machine, there is
no need to remove the frame unless it will be replaced.
4. The new knife can be installed in the upper blade frame by reversing the removal
procedure. A paper clip can be used to hold the knife in position on the lower pin
to ease installation. Remember to make sure that the
sharp edge of the blade is pointing in the same direction as the edge on the
blade which was just removed. Also remember to remove and replace one blade
at a time!

Resetting the Oliver Bread Slicer Blade Life Counter
After the blades have been replaced and the blade frames are re-installed and covers
replaced, reset the blade life counter by:
1. Depress the e-stop.
2. Close the door(s) (the door open indicator must not be illuminated).
3. Hold the green start button down for over 10 seconds until the green light comes
on.

Here is the full Oliver Bread Slicer Manual if you need it.

Oliver Parts

Knife Serrated Bagel and Bun machine Compatible replacement blade for 7107-7053

Oliver Bread Slicer Parts and Oliver Bread Slicer Blades

How to Change Blades on Oliver Bread Slicer